Home insulation is important for houses in this age of high
energy cost. Home insulation helps to reduce the cost of utility bill in terms
of low energy usage. Moreover, it also boosts the values and livability of
houses. Therefore, home insulation is especially a must for houses that are
more than 10 to 15 years old which tend to be not insulated when they were
built 10 to 20 years ago. Even if they were insulated at that time of
construction, the insulation technology or the material might not be as good as
today's technology. Therefore, it's better for you to replace or remodel the
insulation if they were installed a decade ago.
The first step to installing home insulation is to identify
areas of the house that need to be insulated. The general guideline here is to
look at places where there is contact or leak between the interior of your
house and the outside world. A good example of this scenario will be the
window. During the winter, when you open the window, you can feel the cold air
from outside tends to rush into the house. It's the same in the summer where
the heat will enter the house once the window is open. When this situation
happens, heat loss or heat gain is occurring.
One thing to remember is that heat exchange is not
restricted to just the window and the door. It also happens at places that are
intact such as the wall, ceiling and the roof. Even though the wall, ceiling
and the roof is a poor conductor, heat loss and heat gain will still occur. If
there is a crack in the wall or a hole in the ceiling, heat loss or gain will
be accelerated at a faster rate. Therefore, we need insulation to reduce or
better eliminate completely the rate of heat loss and gain. With that being
said, areas such as the walls, ceiling, basement, attic and the roofs are the
critical areas that require to be insulated.
Once you have determined the insulation areas, next step is
to choose the insulation material and types of insulation. Some common
insulation materials that are affordable to most households are fiberglass,
wool, paper, wood and cotton. The more expensive material is the popular
polyurethane that is used in spray foam insulation. The polyurethane can cost
up to several times more than the conventional materials such as fiberglass,
wool and cotton. New and non-conventional insulation materials are being
developed constantly in the market.
Insulation Material Manufacturer
Insulation Material Manufacturer
No comments:
Post a Comment