Attic insulation is an effective way to reduce electricity
bills. It also increases the value of your house. The following tips will help
you perform proper insulation in the attic of your house.
1. Selection of appropriate attic insulation type and its R-value
is important. Therefore, enough information should be gathered about the
building design, its climate and your budget. The insulation should be at least
9.5 to 12 inches within an R-value of R-30 or R-38 respectively.
2. The attic insulation should not only meet your
requirements but it should also be in your budget range. Most commonly used
insulation types are fiberglass batt, cellulose, and spray foam insulation.
3. Fiberglass batt insulation uses long insulation stripes
and is very easy to install. You can give it any color.
4. Cellulose attic insulation can be blown inside covering
and it provides good coverage for even smallest spaces. Also, it is available
in the form of Insulation bags. One can apply it with the help of insulation
blower.
5. Spray foam attic insulation works by expanding and
stretching. It covers small gaps, openings, holes and cracks effectively.
Specialized tools are required to apply spray foam insulation.
6. Increasing insulation from 3 to 12 inches can save up to
20 percent of the energy bills. Also, it is advisable to use high density
insulation for exterior walls.
7. Maximum air flow can be ensured by installing attic vents
along with the entire ceiling cavity. If there is insulation underneath the
roof then do not ventilate your attic. The best option is to consult a
professional.
8. Place insulation nearby light fixtures as it is the main
source of heat loss. It must be applied 4 to 5 inches away from recessed
lighting fixtures. The exhaust fans, pipes, boundaries, lighting fixtures,
soffit vents, chimneys and framings should be sealed outside of the attic.
9. Be careful while installing insulation in your attic.
Read the manuals thoroughly. Follow all precautionary measures mentioned and
always wear proper gear while applying attic insulation. Hire specialized and
experienced professionals if you want to apply cellulose attic or spray foam
insulations.
10. If the insulation is lifted from any place then replace
it immediately or fix it properly.
11. Do not block soffit vents. This ensures attic
ventilation.
12. Repair all leaks before starting insulation procedure.
This will help your attic insulation work effectively.
13. Properly cover the attic trap or access door.
Insulation removal service in St. Louis I have read all the comments and suggestions posted by the visitors for this article are very fine,We will wait for your next article so only.Thanks!
ReplyDelete